Bollards

Bollards create clear, safe boundaries between vehicles and people without closing a space off. They protect footways, plazas and building frontages, guide traffic and keep car parks orderly.

DIAGONAL fixed steel bollard

DIAGONAL is a slim, permanent steel bollard that marks the edge of footways, plazas, car parks and building frontages, and keeps vehicles where they belong. Its diagonally cut top gives a clean, modern line, and reflective bands keep it visible after dark. Hot-dip galvanised as standard, it’s built for a long, low-maintenance life outdoors.

Ideal for

  • Pedestrianised streets and town centres
  • Car park edges
  • Retail and building frontages
  • School and hospital entrances
  • Cycle routes
  • Residential developments

Key benefits

Clean design

A slim 76 mm post with a diagonally cut top that suits both modern and traditional streetscapes.

Visible day and night

Red and yellow reflective bands included as standard; red and white available.

Low maintenance

Hot-dip galvanised for long-lasting protection outdoors.

Permanent

Cast into a concrete foundation, so it stays where it’s put.

Your colour

Galvanised, black, or any of 35 RAL colours.

A row of galvanised DIAGONAL bollards along a shopfront walkway
Galvanised DIAGONAL bollards lining a paved walkway beside a road
Close-up of a galvanised DIAGONAL bollard with its diagonally cut top
Dark powder-coated DIAGONAL bollards at the entrance to a garden path
Height above ground1000 mm
Overall length1455 mm (about 455 mm in the foundation)
Post diameter76 mm
MaterialSteel, hot-dip galvanised
FinishGalvanised, or galvanised and powder coated in any RAL colour
Installation methodCast into a concrete foundation
Reflective bandsRed/yellow included; red/white optional
Article numbers77321610 (galvanised), 77321610C (RAL colour)

DIAGONAL is cast into a concrete foundation, with about 455 mm of the post below ground.

We can supply it on its own, or install it for you with our own installation team. About our installation services

  • Galvanised
  • Black (RAL 9005)

Galvanised as standard, or powder coated in black (RAL 9005). Other RAL colours are available on request; ask our team about the full range.

Reflective bands: red and yellow included as standard; red and white available.

More information

Supply only or supply and install

DIAGONAL can be supplied on its own, or installed by our own installation team, so you have one point of contact from quote to handover. Tell us about your site and we’ll recommend the right fixing method.

About our installation services

Built to last

Every steel part is hot-dip galvanised, and powder coated on top if you choose a colour, for long-lasting protection outdoors. The range is backed by long-term guarantees against rust and against the powder coat flaking, subject to the care set out in the maintenance guide.

Caring for your bollards

  • Galvanised steel: no painting needed. The finish weathers from bright silver to matt grey, which is normal; touch up any bare spot over 50 mm² with zinc paint.
  • Powder coat: touch up small chips with alkyd paint; for damage over 50 mm², repair the zinc layer first.

Request a Quote

Tell us what you need, where it’s going and whether you’d like us to install it, and we’ll come back to you with a quote.

Request a Quote